/SAFETY AND MAINTENANCE OF A RAINWATER HARVESTING SYSTEM
RAINWATER HARVESTING SYSTEM

SAFETY AND MAINTENANCE OF A RAINWATER HARVESTING SYSTEM

Rainwater harvesting systems are now crucial additions to the home. They are a valuable fallback water source during extended periods of drought or water shortages. By collecting and storing rainwater in a corresponding tank, you make full use of all resources available to you while avoiding the cost of sourcing more water for use in the home. However, to guarantee that your tank remains functional as long as possible, you have to be diligent in its care.

Harvesting rainwater can provide much-needed water reserves at no extra cost. However, it would be best to consider your tank’s condition to take full advantage. This assertion means that you have to certify that the tank you attach to your rainwater harvesting system is well maintained. Here are some notes and guidelines on how to do safety and maintenance of a rainwater harvesting system.

Use The Right Construction.

If you are using an underground water tank, its construction is a crucial consideration. As such, you must ensure that its installation occurs under the highest safety standards. First among them is the material. The most ideal for this tank type is steel-fibre reinforced concrete, which enables the structure to withstand high pressure. In addition, the tank must also have airtight seals to prevent leakage.

Protect Your Water

Prevention is better than any cure you might implement after the fact when it comes to water storage. Therefore, it is better and easier to take precautions against any potential contamination than to attempt the requisite clean-up upon detecting it. As such, you can employ any one of the following methods to execute proper cleaning:

Keep the water inlet raised to prevent groundwater from seeping into it.

Install gutter guards or leaf screens to prevent animals, insects and debris from getting into the tank.

Perform regular checks and cleaning on the screens to avoid clogging and contamination from bacteria and fungi.

Execute Regular Roof Maintenance

The roof is an indispensable component of your rainwater harvesting system. It is the first point through which the water flows before going into the gutter, downspout and then into the tank. Therefore, your roof’s condition is vital if you are to certify that the water you collect is clean and safe for consumption.

Roof maintenance activities vary depending on the type you have. So, for example, a slate or tile roof will require inspection for mould or rot that may form underneath the tiles.

In addition to mould concerns, you must also check for vermin that may have settled in the gutters during the drier months. Moreover, it is wise to remain vigilant as rust particles and other debris can get through any previously installed leaf screens and into the tank. So, in this case, the best precaution you can take is to thoroughly clean out your gutters just before the onset of the rainy season.

The best way to care for your rainwater harvesting tank is by adhering to professional maintenance and safety standards. In doing so, you also benefit from significantly extending your tank’s useful life.


Read Also:
Signs You Need a Water Tank
How Regularly Do Water Tanks Need Maintenance And Service Checks?